Railway Cables
Railway Signalling Cable Railway Points Heating Cable

NR/L2/SIG/30060 Axle Counter Cable

 

Application

Axle Counter cable is used to connect the various elements of the AzLM Axle Counter System. It is suitable for

installation in trackside cable troughing, buried duct route and installed in open air on the ballast and clipped to

sleepers as required. Quad types XQS and XQZ are used to connect the EAK Junction box or termination to the

EAK (Mushroom) and Multi Twisted pair types XPS and XPZ are used to connect EAK to the ACE (Axle Counter

Evaluator) equipment.

Standards

NR/L2/SIG/30060

Construction

NR/L2/SIG/30060 Axle Counter Cable

Conductors

Conductors: Solid tinned copper conductor according BS EN60228:2005(previously BS6360).

Insulation: PE (Polyethylene) Type 03 to BS6234.

Water Blocking Compound:Petroleum jelly (XPS and XQS types only)

Anti-Rodent Protection: Glass fibre weave.

Moisture Barrier: Aluminium/polymer laminate tape.

Sheath: PE (Polyethylene) Type 03C to BS6234 or LSZH (Low Smoke Zero Halogen).

Electrical Characteristics at 20℃

Nominal Conductor Diameter mm 0.9 1.4
Nominal Conductor Cross Section mm2 0.63 1.5
Maximum Conductor Resistance Ω/km 30.0 12.5
Minimum Insulation Resistance @500 V DC (1min) MΩ.km 5000 5000
Nominal Mutual Capacitance @800Hz/1000Hz (AC) nF/km 45 50
Dielectric Strength, conductor to screen (DC voltage 2mins) V 3000 3000
Maximum Average Attenuation    
@1.0KHz
@2.4KHz		 dB/km dB/km 0.73 0.45
1.10 0.62
@40KHz dB/km 2.88 1.77
@90KHz dB/km 3.70 2.41
@1.024MHz dB/km 11.2 7.45
Minimum Average Near-end Crosstalk Attenuation    
@1.0KHz dB/km 60 60
@2.4KHz dB/km 60 60
@40KHz dB/km 50 50
@90KHz dB/km 50 50
@1.024MHz dB/km 35 35
Maximum Reduction factor @100V/km,50Hz    
EMI RF 1 (modest level) 0.65 0.65
EMI RF 2 (medium level) 0.45 0.45

Mechanical and Thermal Properties

Minimum Bending Radius: 7.5xOD

Temperature Range: -25℃ to +85℃

Colour Identification:

Sheath Colour: Black

Core Colours

Pair Number A Wire B Wire Pair Number A Wire B Wire
1 WHITE BLUE 13 YELLOW GREEN
2 WHITE ORANGE 14 YELLOW BROWN
3 WHITE GREEN 15 YELLOW GREY
4 WHITE BROWN 16 VIOLET BLUE
5 WHITE GREY 17 VIOLET ORANGE
6 RED BLUE 18 VIOLET GREEN
7 RED ORANGE 19 VIOLET BROWN
8 RED GREEN 20 VIOLET GREY
9 RED BROWN 21 TURQUOISE BLUE
10 RED GREY 22 TURQUOISE ORANGE
11 YELLOW BLUE 23 TURQUOISE GREEN
12 YELLOW ORANGE 24 TURQUOISE BROWN
Two pair cables laid up in quad formation colour coded in rotation, a/b-core: white/black, orange/green.

Dimensions And Weight

Type XPS Multi-twisted-pair Cables

  Number of Pairs  Nominal Sheath Thickness
(n)   mm		   Maximum Overall Diameter    Nominal Weight mm        kg/km
0.9mm conductor
2 2.5 13.8 215
10 2.5 24.7 530
12 2.5 26.4 584
19 2.5 31.4 810
24 2.5 34.5 982
1.4mm conductor
2 2.5 16.4 320
  Number of Pairs  Nominal Sheath Thickness
(n)   mm		   Maximum Overall Diameter    Nominal Weight mm        kg/km
10 2.5 31.4 910
12 2.5 33.8 1016
19 2.5 40.8 1460
24 2.5 45.0 1787
Type XPZ Multi-twisted-pair Cables
  Number of Pairs  Nominal Sheath Thickness
(n)   mm		   Maximum Overall Diameter    Nominal Weight mm        kg/km
0.9mm conductor
2 2.5 13.8 200
10 2.5 24.7 424
12 2.5 26.4 468
19 2.5 31.4 632
24 2.5 34.5 746
1.4mm conductor
2 2.5 16.4 314
10 2.5 31.4 807
12 2.5 33.8 909
19 2.5 40.8 1284
24 2.5 45.0 1548
Type XQS Star-quad Cables
  Quad x Conductor Diameter(n)   Nominal Sheath Thickness mm   Maximum Overall Diameter mm   Nominal Weight kg/km
1×0.9 2.5 11.8 140
1×1.4 2.5 13.8 221
Type XQZ Star-quad Cables
  Quad x Conductor Diameter(n)   Nominal Sheath Thickness mm   Maximum Overall Diameter mm   Nominal Weight kg/km
1×0.9 2.5 11.8 172
1×1.4 2.5 13.8 226